Polycarbonate
Panlite® is a polycarbonate resin that was first commercialized in Japan by Teijin Chemicals. This product has many outstanding characteristics such as high impact strength, heat resistance, dimensional stability, electrical properties, transparency, and sanitary properties. Panlite® is widely used to supply parts for electrical and electronic appliances, business machines, precision machinery, automobiles, medical appliances, safety equipment, houseware, and so on.
General Grades
| TYPE | GRADE | Characteristics | MVR (㎤/10min) |
Main molding methods |
|---|---|---|---|---|
| Standard (mold release / ice color) |
L-1225LM | Ultra low viscosity | 24 | Injection molding |
| L-1225L, LV-2225L |
Ultra low viscosity | 18 | Injection molding | |
| L-1225Y, LV-2225Y |
low viscosity | 11 | Injection molding / Infection bow molding |
|
| L-1250Y, LV-2250Y |
Medium viscosity | 8 | Injection molding / Infection blow molding |
|
| K-1300Y | High viscosity | 2.8 | Extrusion Molding / bow molding / Injection molding |
|
| Weather resistance | L-1225ZL 100 | Ultra low viscosity | 25 | Injection molding |
| L-1225Z 100M | 19 | |||
| L-1225Z 100 | Low viscosity | 11 | Injection molding | |
| L-2225SZ | Low viscosity | 15 | Injection molding | |
| L-1250Z 100 LV-2250Z |
Medium viscosity | 8 | Injection molding | |
| Optical use | AD-5503 | Optical property / Low contamination | 54 | Injection molding |
| Flame resistance | LN-1250Y | Flame resistance / Mold release / Transparency | 11 | Injection molding |
| LN-2250Z | Flame resistance / Mold release / Transparency | 11 | Injection molding | |
| LN-2250ZA | Flame resistance / Mold release / Translucency | 11 | Injection molding | |
| LN-2250A | Flame resistance / Mold release / Translucency | 18 | Injection molding | |
| LN-2250HA | Flame resistance / Mold release / Translucency | 11 | Injection molding | |
| MN-4800 | Flame resistance / Mold release / Translucency | 7 | Injection molding | |
| MN-4800Z | Flame resistance / Mold release / Translucency / Weather resistance |
7 | Injection molding | |
| MN-4805Z | Flame resistance / Mold release / Transparency / Weather resistance |
1 | Extrusion Molding | |
| Frictional wear resistance | LS-2250 | Frictional wear resistance | - | Injection molding |
| High light reflection | LD-1000RM | Light reflection / Whiteness / Mold release | - | Injection molding |
| LN-3010RM | Light reflection / Whiteness / Mold release (non brome, non phosphor type) |
- | Injection molding | |
| LN-3000RM | Light reflection / Whiteness / Mold release / Flame resistance (phosphor type) |
- | Injection molding | |
| LN-1010RM | Light reflection / Whiteness / Mold release / Flame resistance |
- | Injection molding | |
| Light diffusion TYPE | ML-1102 | Low light diffusion | 11 | Injection molding |
| ML-1103 | Standard | 11 | Injection molding | |
| ML-1105 | High light diffusion | 11 | Injection molding | |
| ML-3500ZEL | UL94 V-2 / Low light diffusion / Weather resistance |
18 | Injection molding | |
| ML-6500ZAL | UL94 V-0 / Standard | 4 | ||
| ML-7500ZCL | UL94 V-0 / Low light diffusion | 18 | ||
| ML-5206ZLS | UL94 V-0 / Slight light diffusion | 3.5 | ||
| ML-3500ZEH | UL94 V-2 / Low light diffusion | 8 | Extrusion Molding | |
| ML-6500ZAH | UL94 V-0 / Standard | 2.5 | ||
| ML-7500ZCH | UL94 V-0 / Low light diffusion | 8 | ||
| ML-5206ZHS | UL94 V-0 / Slight light diffusion | 2.8 |
Glass Fiber Reinforced Grades
| TYPE | GRADE | Characteristics | Main molding methods |
|---|---|---|---|
| Standard | G-3410R | Glass fiber 10% / Mold release / UL94 V-2 | Injection molding |
| G-3415R | Glass fiber 15% / Mold release / UL94 V-2 | ||
| G-3420R | Glass fiber 20% / Mold release / UL94 V-2 | ||
| G-3430R | Glass fiber 30% / Mold release / UL94 V-2 | ||
| Low anisotropy |
G-34**H | Glass fiber contained / Low anisotropy / Good appearance / UL94 V-2 | Injection molding |
| Isotropy | G-33**M | Glass fiber contained / Low anisotropy / Good appearance / UL94 V-2 | Injection molding |
| Frictional wear resistance |
GS-34** | GF contained / Frictional wear resistance / UL94 V-2 | Injection molding |
| Flame resistance |
GN-34**R | GF contained / UL94 V-0(1.5mm) | Injection molding |
| GN-3610L | GF10% / non-bromine / non-phosphor / UL94 V0(1.6mm) | Injection molding | |
| GN-3620L | GF20% / non-bromine / non-phosphor / UL94 V0(1.6mm) | Injection molding | |
| GN-3630H | GF30% / non-bromine / non-phosphor / Low anisotropy / UL94 V0(1.6mm) | Injection molding | |
| GN-3610Z | GF10% / non-bromine / non-phosphor / weather resistance / UL94 V0(1.6mm) | Injection molding | |
| GN-3610ZL | GF10% / non-bromine / non-phosphor / weather resistance / High flow / UL94 V0(1.6mm) |
Injection molding | |
| High flame resistance |
GV-34**R | Glass fiber contained / UL94 V-0(0.75mm) | Injection molding |
| Camera use | G-3110PH | Glass fiber 10% / Low anisotropy / Good appearance / Paintwork | Injection molding |
| G-3120PH | Glass fiber 20% / Low anisotropy / Good appearance / Paintwork | Injection molding | |
| G-3130PH | Glass fiber 30% / Low anisotropy / Good appearance / Paintwork | Injection molding |
Carbon Fiber Reinforced Grades
| TYPE | GRADE | Characteristics | Main molding methods |
|---|---|---|---|
| Standard | B-8110R | CF10% / Mold release / UL94 V-2 | Injection molding |
| B-8120R | CF20% / Mold release / UL94 V-2 | ||
| B-8130R | CF30% / Mold release / UL94 V-2 | ||
| Flame resistance |
BN-81**R | CF contained / Mold release / UL94 V-0 | Injection molding |
| B-41**R | CF contained / Mold release / non-brome / Non-phosphor / UL94 V-2 | Injection molding | |
| EMI shield | E-8715 | EMI shield / Mold release / High heat resistance / High impact resistance / Phosphor type / UL94 V2 |
Injection molding |
| EN-8515N | EMI shield / Mold release / High heat resistance / Phosphor type / High flame resistance / UL 94V-0, 5VA |
Injection molding | |
| EN-8615N | EMI shield / Mold release / Phosphor type / flame resistance / UL94 V-0 | Injection molding | |
| Frictional wear resistance |
BS-81**R | CF contained /Frictional wear resistance / UL94 V-2 | Injection molding |
LED LAMP [ Optical use ]
Camera Components [ Precision Parts ]
O/A Equipment [ Precision Parts ]
Head Lamp…. [ Automotive ]
PC alloy grades
| TYPE | GRADE | Characteristics | Main molding methods |
|---|---|---|---|
| Standard | AM-1**** | Polycarbonate | Injection molding |
| AM-8*** | Polycarbonate. polyester alloy | ||
| AM-9*** | Polycarbonate. polyester alloy | ||
| Fiber reinforced grade | AM-9***F | Polycarbonate. polyester alloy | Injection molding |
| GM-9*** | Polycarbonate. polyester alloy | ||
| Flame resistance | MN-3600H | Polycarbonate | Injection molding |
| MN-3705 | Polycarbonate |
SH-PC (Surface Hardness)
| TYPE | GRADE | Characteristics | Main molding methods |
|---|---|---|---|
| Standard | SH-1126Z | Surface Hardness H, Transparency, Weather resistance | Injection molding |
| New PC | SH-3424Z(W-0108) | Surface Hardness H, Transparency, Weather resistance | Injection molding |
| New PC | SH-3430Z(W-0109) | Surface Hardness H, Transparency, Weather resistance | Injection molding |